Before understanding the frequency difference between 28kHz and 40KHz of ultrasonic cleaning machine, let's know what these two parameters mean respectively: 28kHz refers to 28000 vibrations per minute; 40KHz means 40000 vibrations per minute.

頻率是選擇超聲波清洗機的一大因素，頻率也決定了清洗力度。一般的來講，清洗五金、機械、汽摩、壓縮機等行業的清洗多采用28KHZ頻率的清洗機。光學光電子清洗、線路板清洗等多采用40KHZ的頻率。

Frequency is a major factor in choosing ultrasonic cleaning machine, and frequency also determines the cleaning strength. Generally speaking, 28kHz frequency cleaning machine is used for cleaning hardware, machinery, automobiles and motorcycle, compressor and other industries. The frequency of 40KHz is mostly used for optical optoelectronic cleaning and circuit board cleaning.

這是一個錯誤的說法，而結果恰恰相反，頻率越低清洗力度反而更強，清洗效果也更好。不過具體還是看清洗物品，對於大部分產品而言40Khz頻率即夠了。

This is a wrong statement, but the result is just the opposite. The lower the frequency, the stronger the cleaning force and the better the cleaning effect. However, it still depends on the cleaning items. For most products, 40KHz frequency is enough.

在28khz低頻情況下，清洗的液體受到壓縮與稀疏作用的時間間隔更長，使氣泡能生長到更大尺寸，對清洗工件表麵作用力更強。

At 28 kHz low frequency, the time interval between compression and thinning of the cleaning liquid is longer, so that the bubbles can grow to a larger size and exert a stronger force on the surface of the cleaned workpiece.

所以一般大型部件表麵或者汙物與工件表麵結合度較高會選擇低頻超聲波清洗機，但是低頻比較容易損傷腐蝕工件表麵，所以對那些表麵要求較高的零件不宜選擇較低的頻率。

Therefore, generally, the low-frequency ultrasonic cleaning machine will be selected for the surface of large parts or the combination of dirt and workpiece surface is high, but the low-frequency is easy to damage and corrode the workpiece surface, so it is not suitable to select a lower frequency for those parts with high surface requirements.

大家都知道超聲波清洗機的基本原理是基於液體的空化效應，事實上空化效應的強度直接跟頻率有關，頻率越高，空化氣泡越小，空化強度越弱。

As we all know, the basic principle of ultrasonic cleaning machine is based on the cavitation effect of liquid. In fact, the intensity of cavitation effect is directly related to the frequency. The higher the frequency, the smaller the cavitation bubble and the weaker the cavitation intensity.

而且高頻穿透力強，適合清洗精密零件，比如電子零件、磁性材料、小型軸承加工;那些集成電路芯片、矽片鍍膜的則用更高的頻率超聲波清洗機;像那些機動車輛的發動機、閥門等大工件一般則用低頻率超聲波清洗機清洗，而市場用的比較適中的頻率是40KHZ。

And high-frequency penetration, suitable for cleaning precision parts, such as electronic parts, magnetic materials, small bearing processing; Those with integrated circuit chips and silicon films use higher frequency ultrasonic cleaning machines; Large workpieces such as engines and valves of motor vehicles are generally cleaned by low-frequency ultrasonic cleaning machine, while the relatively moderate frequency used in the market is 40KHz.