單槽超聲波清洗機是運用空化作用成倍或十幾售地提高清洗效果。當把液體放入清洗機內,施加後,由於超聲波在清洗液中是一種疏密相間,輻射傳播的高頻波,從而使液體高速往複振動。在振動的負壓區由於周圍的液體來不及補充,形成無數的微小真空氣泡,而在正壓區,微小氣泡在壓力下突然閉合,在閉合過程中由於液體間相互碰撞產生強大的衝擊波形成可達幾千個大氣壓的瞬時高壓,作用在被清洗的工件上。吸附在工件上的油膩、雜質在連續不斷的瞬時高壓作用下迅速脫離工件。從而達到清潔的目的。
The single slot ultrasonic cleaning machine uses cavitation to improve the cleaning effect by multiplying or selling more than ten times. When the liquid is placed in the cleaning machine and applied, the ultrasonic wave is a high-frequency wave that radiates and propagates in the cleaning solution, causing the liquid to vibrate back and forth at high speed. In the negative pressure zone of vibration, countless small vacuum bubbles are formed due to the lack of time for the surrounding liquid to replenish. In the positive pressure zone, small bubbles suddenly close under pressure, and during the closing process, strong shock waves are generated due to the collision between liquids, forming an instantaneous high pressure of up to thousands of atmospheres, which acts on the cleaned workpiece. The oil and impurities adsorbed on the workpiece quickly detach from the workpiece under continuous instantaneous high pressure. To achieve the purpose of cleaning.
單槽超聲波清洗機的(de)使用方法:
Usage of single slot ultrasonic cleaning machine:

1.需要清洗的物品放入單槽清洗機的清洗籃中,然後將清洗籃放入清洗槽,不可將物品直接放入清洗槽裏,避免損壞設備及清洗效果。
1. Place the items that need to be cleaned in the cleaning basket of the single slot cleaning machine, and then place the cleaning basket in the cleaning slot. Do not directly place the items in the cleaning slot to avoid damaging the equipment and cleaning effect.
2.根據不同的產品或者清洗效果,按比例倒入清洗液,水或者水溶液,水位低不得低於60mm,而高不得超過80mm。
2. According to different products or cleaning effects, pour cleaning solution, water or aqueous solution in proportion, with the water level not less than 60mm low and not more than 80mm high.
3.接入220V/50Hz電源三芯插座,接通電源。
3. Connect to a 220V/50Hz power three-core socket and turn on the power.
4.打開單槽超聲波清洗機開關按鈕,綠色開關亮顯示正常工作。
4. Turn on the switch button of the single slot ultrasonic cleaning machine, and the green switch will light up to indicate normal operation.
5.按照物品的清洗要求,打開超聲波清洗機溫度控製進行溫度調節。
5. According to the cleaning requirements of the item, turn on the temperature control of the ultrasonic cleaning machine for temperature adjustment.