多槽超聲波清洗機常見類型有：雙槽超聲波清洗機、三槽超聲波清洗機、四槽超聲波清洗機、五槽超聲波清洗設備等，下麵小編簡單介紹幾種常見的清洗組合和多槽超聲波清洗機的功能。

Common types of multi-slot ultrasonic cleaning machines include: double-slot ultrasonic cleaning machines, three-slot ultrasonic cleaning machines, four-slot ultrasonic cleaning machines, five-slot ultrasonic cleaning equipment, etc. The following is a brief introduction to several common cleaning combinations and the functions of multi-slot ultrasonic cleaning machines.

1、雙槽超聲波清洗機：此類清洗機與單槽清洗機一樣是超聲波清洗設備家族中常見的成員。常用於散熱器、不鏽鋼製品、精密五金、電鍍工藝、儀器儀表、機械零件、液壓等工件、電鍍模具等工件的清洗，在具體工藝中，雙槽超聲波設備一般有以下幾點組合：超聲波粗洗槽與超聲波精洗槽、超聲波清洗槽與超聲波漂洗槽、超聲波清洗槽與清水漂洗槽、超聲波電解清洗槽與除垢槽等。

1. Double-slot ultrasonic cleaning machine: this type of cleaning machine is a common member of the ultrasonic cleaning equipment family like single-slot cleaning machine. It is commonly used for the cleaning of radiators, stainless steel products, precision hardware, electroplating process, instruments and meters, mechanical parts, hydraulic and other parts, electroplating molds and other parts. In the specific process, the double-tank ultrasonic equipment generally has the following combinations: ultrasonic rough cleaning tank and ultrasonic fine cleaning tank, ultrasonic cleaning tank and ultrasonic rinsing tank, ultrasonic cleaning tank and clear water rinsing tank, ultrasonic electrolytic cleaning tank and descaling tank.

其中，超聲波清洗槽與清水漂洗槽的組合方式，其清洗精度與單槽超聲波清洗機相同，適用於對清洗精度有一定要求但又不太高的清洗。對於清潔度和精度要求較高的清洗，一般采用超聲波粗洗槽和超聲波精洗槽組合方式或多清洗槽的設備。通常首先使用低頻範圍內振幅大、去汙力強的超聲波清洗機。超聲波粗洗，然後使用更高頻率的清洗機進行高潔淨度和精密清洗。

Among them, the combination of ultrasonic cleaning tank and clean water rinsing tank has the same cleaning accuracy as that of single-tank ultrasonic cleaning machine, and is suitable for cleaning with certain requirements for cleaning accuracy but not too high. For cleaning with high requirements for cleanliness and accuracy, the combination of ultrasonic rough cleaning tank and ultrasonic fine cleaning tank or equipment with multiple cleaning tanks are generally adopted. Generally, the ultrasonic cleaner with large amplitude and strong detergency in the low frequency range is used first. Ultrasonic rough cleaning, and then use a higher frequency cleaner for high cleanliness and precision cleaning.

2、三槽超聲波清洗機：這類超聲波清洗設備通常在雙槽超聲波清洗係統上增加熱風幹燥、慢拉風幹燥等幹燥係統，比雙槽多一個幹燥槽超聲波，也有一些三槽清洗設備由超聲波粗洗和超聲波精洗加超聲波漂洗槽組成。

2. Three-slot ultrasonic cleaning machine: This type of ultrasonic cleaning equipment usually adds drying systems such as hot-air drying and slow-drawing air drying on the dual-slot ultrasonic cleaning system. There is one more drying tank ultrasonic than the dual-slot ultrasonic cleaning equipment. There are also some three-tank cleaning equipment consisting of ultrasonic rough cleaning and ultrasonic fine cleaning plus ultrasonic rinsing tank.

3、四槽式超聲波清洗機：此類超聲波清洗機通常由四個清洗槽組成：超聲波粗洗槽、超聲波精洗槽、超聲波漂洗槽和烘幹槽。四槽機適用於清洗電子零件、精密電子儀器、PCB線路板、機械零件、儀器外殼和金屬電鍍零件。

3. Four-groove ultrasonic cleaning machine: This type of ultrasonic cleaning machine usually consists of four cleaning tanks: ultrasonic rough cleaning tank, ultrasonic fine cleaning tank, ultrasonic rinsing tank and drying tank. The four-slot machine is suitable for cleaning electronic parts, precision electronic instruments, PCB circuit boards, mechanical parts, instrument shells and metal electroplating parts.

4、五槽超聲波清洗機：五槽式清洗機設備通常在二次或三次超聲波清洗工藝和幹燥係統上增加高壓噴淋清洗或浸泡清洗(熱水浸泡或冷水浸泡)或蒸汽清洗、鼓泡清洗等。

4. Five-slot ultrasonic cleaning machine: The five-slot ultrasonic cleaning machine usually adds high-pressure spray cleaning or immersion cleaning (hot water immersion or cold water immersion) or steam cleaning, bubble cleaning, etc. on the second or third ultrasonic cleaning process and drying system.

5、六槽、七槽及以上清洗槽超聲波清洗機：視具體清洗工藝而定，通常由以下清洗槽的部分或全部組成：高壓噴淋槽、鼓泡清洗槽、吹氣清洗槽、超聲波粗洗槽、超聲波精洗槽、超聲波漂洗槽、超聲波除油除鏽槽、冷熱水浸泡槽、酸洗槽、市水衝洗槽、純水漂洗槽、蒸汽清洗槽、切割空氣罐、熱風幹燥罐、注油罐、冷卻罐等。

5. Ultrasonic cleaning machine for six, seven and more cleaning tanks: depending on the specific cleaning process, it is usually composed of some or all of the following cleaning tanks: high-pressure spray tank, bubbling cleaning tank, blowing cleaning tank, ultrasonic rough cleaning tank, ultrasonic fine cleaning tank, ultrasonic rinsing tank, ultrasonic oil and rust removal tank, cold and hot water soaking tank, acid cleaning tank, municipal water washing tank, pure water rinsing tank, steam cleaning tank, cutting air tank Hot air drying tank, oil filling tank, cooling tank, etc.

多槽超聲波清洗機與單槽超聲波清洗機相比。清洗槽的數量和具體功能根據清洗對象和清洗工藝的不同而不同，通常是多次超聲波清洗與其他清洗方法如高壓噴淋清洗、噴氣清洗、熱浸清洗、鼓泡清洗等清洗方法相結合。您有需求給來91污網站http://www.ahfanglei.com進行谘詢了解！

Compared with single-tank ultrasonic cleaning machine, multi-tank ultrasonic cleaning machine. The number and specific functions of cleaning tanks vary according to different cleaning objects and cleaning processes. Usually, multiple ultrasonic cleaning is combined with other cleaning methods, such as high-pressure spray cleaning, jet cleaning, hot dip cleaning, bubble cleaning, etc. Come to our website if you need http://www.ahfanglei.com Consult and understand!