清洗速度快。線路板超聲波清洗機的速率比其他清洗方式都高，比浸泡式清洗快10～20倍，比噴淋式清洗提高20％一50％的功效。

Fast cleaning speed. The speed of the circuit board ultrasonic cleaning machine is higher than other cleaning methods, 10-20 times faster than immersion cleaning, and 20% -50% more efficient than spray cleaning.

全方位清洗無死角。與噴淋和與浸泡相比，它沒有清洗死角，因此更適用於內外結構複雜，微觀不平，有狹縫、小孔、拐角、線路密集的電子線路板。

Thoroughly clean without dead corners. Compared with spray and immersion, it does not have any dead corners for cleaning, making it more suitable for electronic circuit boards with complex internal and external structures, uneven microstructure, narrow gaps, small holes, corners, and dense circuits.

線路板不會被損壞變形。與噴淋相比，專業的線路板超聲波清洗機清洗薄的和微小線路板時，也會保證線路板的完好。

The circuit board will not be damaged or deformed. Compared to spray cleaning, professional ultrasonic cleaning machines for circuit boards can also ensure the integrity of thin and small circuit boards.

適應清洗多種汙漬。可以用於除油、去汙、除鏽、除氧化皮、鈍化等多種頑固汙漬。

Suitable for cleaning various types of stains. It can be used for various stubborn stains such as oil removal, dirt removal, rust removal, deoxygenation, passivation, etc.

適用材質廣。專業的線路板超聲波清洗機適用於鋼、鑄鐵、不鏽鋼、銅、鋁、玻璃、電路板、電子和光學元件等各種零件的清洗工作。

Suitable for a wide range of materials. A professional PCB ultrasonic cleaning machine is suitable for cleaning various parts such as steel, cast iron, stainless steel, copper, aluminum, glass, circuit boards, electronic and optical components.

清洗一致性好。不管需要清洗的線路板是寬是窄，是大事小，結構複雜還是簡單，單件還是批量，放入線路板超聲波清洗機中清洗後，都可以獲得手工清洗無可比擬的均一的清潔度。

Good consistency in cleaning. Regardless of whether the circuit board needs to be cleaned is wide or narrow, large or small, complex or simple in structure, single piece or batch, after being placed in the circuit board ultrasonic cleaning machine for cleaning, it can achieve unparalleled and uniform cleanliness compared to manual cleaning.

基於線路板超聲波清洗機的這些優勢，在它上市後，便受到了工程人員和試驗人員的喜愛。隻是在使用線路板超聲波清洗機時，要想讓它的優勢大程度的顯現出來，還需要調節好清洗溶液的溫度，在40度～50度間的液體溫度，是適合進行清洗工作的。

Based on these advantages of the circuit board ultrasonic cleaning machine, it has been loved by engineering and testing personnel since its launch. When using a circuit board ultrasonic cleaning machine, in order to fully demonstrate its advantages, it is necessary to adjust the temperature of the cleaning solution. A liquid temperature between 40 ° C and 50 ° C is suitable for cleaning work.

本文由超聲波清洗機整理發布，您是不是對這些內容有所了解了呢?更多的內容請點擊:http://www.ahfanglei.com  91污會有更多精彩內容等你查看。

This article is organized and published by an ultrasonic cleaning machine. Do you have any understanding of these contents? For more information, please click on: http://www.ahfanglei.com We will have more exciting content waiting for you to check out.